It is important to select the method to be used based on the different factors involved in the system when layering ceramic tiles. This laying method must be selected according to the design of the functional requirements of the tiled area and the system. Verify the substrates, the environmental conditions and the intended use, in order to get the correct selection of the ceramic tiles. It comes together with the ideal bonding and grouting materials. Here are some general tips for you to consider.
Choose the type of adhesive based on its intended use, format, substrate, and the water absorption rate if the tile and it also important to check that the tiles are laid within the open time of the adhesive to prevent a dry film forming that may hinder adhesion. The width of the joint width is depending on the format of the tile and the expected use the tiled surface will have to withstand. It is not advisable to use tile joints of less than 3 mm and tiles must never be laid abutted. Check these 60 beautiful Spanish tiles below to inspire you.